The gentle ebb and flow

 A few days ago this NOS air cleaner got away.  It sold for $200 including shipping from Europe.  It's not as common as the version with the large end on the right side but I think this is a cleaner looking part, and thus, I prefer it to the more common version.

Unfortunately, I didn't get to my email soon enough and someone else got their hands on it.  It sold rather quickly.

 I did, however, get my hands on this one.  An NOS ignition with two keys.  It's a non-scripted bezel with the parking light provision.

If it's in perfect condition, I'll put it in the spare column I am building up along with a NOS contact plate and turn signal arm.  The column housing is being powder coated in the next few days.

If it isn't in perfect condition, I'll use it for parts to fix the OE scripted bezel ignition switch from Nigel.  That switch is waiting for parts so that it can be repaired.

Not much happening with Nigel right now...waiting on the spindles to be completed so I can install the CSP brake kit.  I've left the Airkewld kit on the car so that it's on 4 tires and can be moved if needed.

I have started looking for a fabrication shop to make the new brackets for the Airkewld kit.  I imagine it's going to take a while to find someone willing to make two random pieces without a CAD illustration.  I may have to revert to old school knowledge and whip up something in CAD but I'll cross that bridge when I get to it.

Some days you're the bug and some days you're the windshield

While looking for information about the specific model of camber compensator that I own as a result of a thread I started, I found someone in the UK selling repop stickers for them.  I've been looking for these stickers for a few years so it was nice to see that someone decided to start printing them.

I stopped by the powder coater today with 3 complete sets of spindles along with a few other miscellaneous parts.  I'll get one set back in a week so I can start assembling the CSP brake kit and hopefully get it on the car.  That will allow me to pull the Airkewld kit, remove the bracket and swing by a couple machine shops that are local to see if they can create a more suitable bracket.

The auction for this book just ended and I missed out on it due to being sniped.  The price wasn't terrible (sold for $204.49) considering the condition of the book.  It would have been nice to have but it's not the end of the world that I didn't get it.

I've got plenty of other things to spend my money on with regard to getting one or both of these cars finished.

Watching the snail move

Not much to report today.  I pulled down all of the torsion arms that I have for the two beams and discovered that I don't have two full sets of control arms AND that the lower arms that I have are in questionable condition.

I've asked around and one contact came back with the image of NOS but quite rusty upper arms.

I'm not convinced that this is the best I can do for the money so I'm going to wait until I receive a reply from three others before I shell out the cash.  I know where to get NOS lower arms but I'd like to get my hands on a complete set if possible.

In other news, I spent way too much time pulling old tie rod ends off of the actual tie rods today.  I then checked them for straightness (they're good) and put them in the 'to be powder coated' pile.

So, I can check 'tied rods' off of the list for the two upcoming beam builds.  I just have to get my hands on some decent control arms now.

The timing will be perfect if I can gather up the parts for a fall/winter build up.

Time is what we want most, but what we use worst.

The two sets of NOS spindles arrived today, along with the emergency flasher switch knob and a *ahem* correct tool for removing tie rod ends.

The spindles will go out this weekend for powder coat and I should see them back in a week or two.

And this was sitting on the porch.

 I opened the box to inspect the contents and found a nicely packaged group of parts.  The only real bummer about this kit is that it DOESN'T have backing plates.  I didn't notice that until the box arrived.  I went online to compare the photo to what I received and noticed that they're not shown.  After a bit more digging, I found old installation instructions that seem to indicate that they stopped including backing plates around 2007/2008.  I have sent a message to CSP to inquire about their availability since it was one of the things I really liked about the kit.  The CIP1 website shows an image with the backing plates as a part of the kit.

Wheel bearings and wheel seal included.

I'll be getting into this kit more over the weekend - especially since the spindles arrived - and I'm starting my write up/comparison of contents.  The write up will take some time to complete because I want it to be comprehensive:  What questions would I want answered to help me make a decision?

If you're walking down the right path and you're willing to keep walking, eventually you'll make progress.

I received a package from Australia today that contains two sets of front beam bushings to replace the needle bearings and bakelite bushings buried deep in the front beam.  The bushings are made of Ertalyte and are the subject of this thread on TheSamba.com

I currently have three front beams: 1. The current front beam on Nigel (OE), 2. The NOS beam I bought eons ago that has very slight surface rust on the needle bearings and 3. The beam that came from Ferris, which is harboring sand due to being subjected to one of the many incompetent powder coating shops I managed to find.  The beam that's currently on Nigel will ultimately become the 'spare' beam-assuming that it's not rusted out in the lower collar corner (typical place for them to rot).  Ferris' original beam is intended to go back once the sand is flushed out and these bushings are installed.  Control arms will be stripped and powder coated, new ball joints, tie rod ends and a reconditioned steering box will be added.

The Airkewld front disc kit will wind up on the Ferris beam.  I decided to take advantage of the CIP1 sale and bought a CSP front disc kit that will arrive in about a week.  The brackets from the Airkewld kit will be replaced with properly manufactured brackets to eliminate the 20 washer assembly process provided as 'normal' by Airkewld - which, let's face it, is fucking ridiculous.  To me it says that they don't give enough of a shit to do it correctly.

I plan to post up a comprehensive review and comparison between the two kits once I've had a chance to get everything together.  I realize that the 'review' will probably sound biased based on my recent experience with Airkewld but that's on them, not me.  I'll do what I can to make it objective but the facts will likely show what I already suspect.

I can't wait to start getting some of these parts together...it's been way too long.

I don't know where I'm going, but I'm on my way.

The Hassia fog lights arrived in one piece today.  They've got more scratches on the back side chrome than I hoped but they're in otherwise really nice condition.

Scored this NOS fuel pump yesterday from a local guy.  He's getting out of the Type 3 scene and has a few parts remaining.  I'll be going back and picking up a few more things before he clears out totally.


In other news, I discovered that CIP1 has a CSP disc brake kit for the Type 3 in stock and it's on sale.  I'm tempted to buy it and pair up the timing with the inbound NOS drum spindles.  It would buy me some time in getting a proper bracket for the Airkewld brake kit manufactured that will eliminate the washers as a part of the assembly.  I would install the Airkewld kit on the 65 some time down the road.  I could then do a full write up on my experience with the two kits for anyone wondering which one is better overall - assuming my opinion means anything.  I've got a few hours to decide before the sale ends.

Never mistake activity for achievement

Took everything apart again.  I decided to drop the front end while I was at a point where things were not finished.  I got 1/2 of it done late last night but had to stop.  The driver's side 'catch' on the lower control arm had to be smacked a few times to get it out of the way.

In my excitement to get things going, I managed to smash the threads on my right outer tie rod end so I ordered a new one last night.

The end result is a front end that's 1.5" lower than before.  The ride height is good now...more closely matching the rear and eliminated the 'boat in water' effect.  The spare tire is in the trunk and the fuel tank is 1/2 full.  It'll drop a little more withan a driver and more fuel.

Next up is new brake hoses, bleeding the brakes and adjusting everything with a short road test once the replacement tie rod end appears later in the week.

Just for recollection purposes, this is the 'before' picture.  Same fuel level with the spare tire in front.

I'll get to the brakes shortly.

Big vision, small steps

 The adapters and the test lug nut arrived today.  Since I only have a full set of the adapters, I went with those.

The lug nut also fits so I'm going to order the rest of the set so that I can remove the adapters at some point.  For now, I'll leave it alone because it works.

Now that the car is back on tires and 'settled' a bit, I've decided to lower the front end one spline.

After that's done, I'll put the brakes back together and then take it in for alignment.  I should have a solid 4 weeks where I can drive the car before a storage space is required for the winter months.

I changed out the mounting screws on the dash for the push button assembly.  It never ceases to amaze me how the condition of a screw head can change the over all look of its assembly.

If I get real ambitious tonight, I'll pull the front end apart and see if I can get it dropped one spline AND put it back together.  I like a good challenge.

If you can find a path without obstacles, it probably doesn't lead anywhere

I did a LOT of digging around before I settled on buying lug nut adapters for my current lug nuts.  In addition, I found a company that claims to have the correct lug nuts but I only bought one as a test piece because they don't accept returns.  That test piece will arrive on Monday while the adapters will arrive tomorrow.  If the adapters don't work, I'll hold my figurative breath for the test lug nut on Monday.

In the mean time, I bought a few things...

• M8x1.25x40mm bolts for the early spindles that were original to Nigel.  They're early drum spindles in that they have 8mm ball joint bolts where the later version uses a 10mm bolt.
• Two sets of NOS drum spindles due in a couple of weeks from one of my stops in the North East in May.
• M10x1.5x40mm bolts for the ball joints on the 'normal spindles'.  I bought a few from ISP West as well.  Hopefully, ISP sends me the correct bolts and I'll have a few extras.
• Bought a set of Hassia fog lights from a Samba member for a decent price - they'll arrive on Monday.
• Bought an emergency flasher knob from a Samba member in Thailand - it'll show up once I've forgotten about it.
• Ordered another complete set of front Timken bearings for the next beam build.

In a couple of weeks I'll be sending out the ZV/JCU 4R3 distributor that flash rusted last Fall for a cleaning and rebuild.  The guy who's doing the rebuild is off on vacation and I've spent enough lately so the timing works out quite well.

I sold the red bins from the parts cabinets.  I'm still waiting for the rest of my replacement pieces to finish the cabinets off but they're in pretty good shape now.  No more re-organizations to come...just organized parts waiting for a car to call 'home'.  I think I've run out of distractions - and that's a good thing.

I'm also waiting on fabricated bushings for the front beam.  I bought two complete sets - which means that I can have both beams stripped of their bushings and bearings, cleaned and powder coated in preparation for the bushings.  I'm looking forward to getting both beams rebuilt.  The third beam (on the car currently) will be kept with bearings/bushings and I'll rebuild it after its painted and keep it as a spare.

There have been a lot of parts popping up in the classifieds that I've been tempted to buy but I've resisted...knowing that I either have five of the same thing currently or that I don't really need it.

"Like sands through the hourglass..."

Today's lesson is in lug nuts and customer service.

The photo shows the gap between the wheel and the lug nut that's supposed to hold it snug to the hub.

This is where the lesson began.

Type 3 VW wheels are, by definition, in requirement of 'ball seat' lug nuts/bolts.

There are two options when buying this brake kit:  12mm stud and 14mm stud.  I chose the 12mm studs - and that, as I've learned today, turned out to be quite a mistake.  M12x1.5, ball seat lug nuts with a width of 24mm (to properly seat on the wheel) don't fucking exist.  However, had I chosen 14mm studs, the equivalent lug nut is super easy to find.

This is but one example of why I avoid games of 'chance' and 'luck' as a means of keeping money in my pocket and sanity in hand.  I don't play lotto numbers, buy scratch tickets or enter raffles of any kind.  I had 50/50 odds and lost...but I digress.

After spending the better part of the day trying to find the correct lug nuts, I gave up and bought conical seat to ball seat adapters for the existing lug nuts.

The customer service lesson isn't for me although if the company who manufactured the brake kit knew jack shit about customer service, I would have solved the problem a week ago.  Rule #1:  Provide clear installation instructions with clear, not blurry, photos.  Rule #2:  If a customer contacts you via email seeking information - get their name correct when you reply.  Rule #3: Provide useful information when you reply.  You know, suggestions that will actually solve the problem - not just enough information to send the customer on an educational scavenger hunt.

Instead, they chose to provide just enough information to piss me off and make me figure out how to solve the problem myself.  And that took some learning that I wasn't prepared to take on...although I now know more about lug nuts than I hope to ever use.  I could go on Jeopardy! and school the shit out of Ken Jennings if "Lug Nuts" was a theme for a show.

Hindsight: I should have returned the front end to stock and put drum brakes back on the car.

Escaping the rabbit hole...or not.

I thought I was making decent progress until I hit the next obstacle in this process:  the studs don't allow lug nuts to snug the wheel to the hub...so while it appears that I'm close to being finished, I'm not any closer than I was a week ago.

I've tried two different type of lug nuts with similar results.  And, to add insult to injury, the studs are too long to allow the hub caps to be fitted to the wheel.

What.the.actual.fuck.

I've emailed Airkewld.com but haven't heard back about how to resolve the issue.

Still on the fence about keeping the brakes or getting rid of them...I just want to drive the car.  Seems simple enough, yeah?

Disc brakes, part 3

I built up the driver's side spindle tonight on the bench.

I didn't get it installed but it's pretty well ready to go.  I'm still waiting for brake lines.  I thought I'd found them at CB Performance but a call to them revealed that their web description is incorrect and the hoses they describe (and that I wanted) are not available.

They referred me to Fast Fab but I haven't heard back from them yet.

The 5 washer special, all up close and personal.

Maybe in the West Coast this isn't a big deal...but each one of those washers is another spot for corrosion to start.

Check out that clearance on the brake rotor to the bracket!  Clearly, a flat bracket was much cheaper than designing/manufacturing a proper bracket with a set back.

If I wind up keeping the brakes long term, I'll get proper brackets made if I get around to restoring the car.

A close up shot of the clearance between the brake caliper and the wheel hub/rotor.

If at first you don't succeed, try, try again. Then quit. There's no point in being a damn fool about it.

 After the last post, I emailed Airkewld for an explanation about their instructions and the issues I encountered.  Unexpectedly, they replied fairly quick but the answers were geared toward an idiot and that just pissed me off a little more.  It was very clear that they're either employing a moron to reply or they're used to dealing with morons and have to "Barney it down" for their customers.  This is the only thing I've purchased from them and based on my perception of quality of their product and the design details, I don't think I'll be going back for anything else.  The next brake kit will be from someone else that knows how to make a proper bracket.  It's so easy to get it right that it just irritates the shit out of me that this is where they decided "Aw, fuck it, good enough!  Stick it in the box."

I asked some local contacts about 'next steps' but no one had an answer that was any different than what I suspected:  Short of either buying a different kit or redesigning the bracket that Airkewld created, I had to use the original brackets and washers.  I went to the local Home Depot and found extra bolts and 20 washers.  I used the extra bolts to 'thread' the aluminum holes in the Wilwood calipers and then strip that thread away by intentionally over-tightening them.  I used that technique on both sides of the mounting hole and stripped away 80% of the thread I'd created to open up the holes.  Took about 20 minutes to do all four holes and another 10 minutes to mount the caliper and top ball joint.

I wound up using a total of ten washers per caliper.  I'm not at all happy about using 20 f'ing washers on a brake kit that should be designed to eliminate half-assed inventions.  There is roughly 1 - 2 mm of space between the caliper and the rotor now that it's mounted/centered.  I'm hoping that it won't rub but I won't be the least bit surprised if it does wind up rubbing.

No pictures were taken of the final install on the passenger's side - phone died and the camera decided it doesn't like the humidity in the garage.  I'll see about photos once I get the driver's side installed...or I have time to go back out and take them.

After this bit of fun, I get to figure out the reservoir mounting situation and then bleed the brakes (my favorite thing to do) before I can drive the car.